Pentest Tools

Interactive Network Packet Builder v1.0

This topic contains 1 reply, has 2 voices, and was last updated by  Hacktoolnosurvey 3 years, 6 months ago.

  • Author
    Posts
  • #2770

    shinney7
    Participant

    With Interactive Network Packet Builder you can visually build “any” syntactically correct IP packet for a number of well-known protocols via simple point-and-click operations. Supported protools are SSH, FTP, HTTP, SIP, iSCSI, SMBv1, etc. The output is a binary payload (PDU).

    Example: Seven easy steps to build a complete ICMP Ethernet frame

    We build layer-by-layer, and have 3 layers to cover. We suggest the absolute minimum of steps (7) in order to shorten the example below.

    Select ICMPv4 in the top left Select Stack Layer list
    Copy Hex string from Output Pane
    Select IPv4 in the top left Select Stack Layer list
    Paste the data copied in Step 2 into Data field, press Enter key
    Copy Hex string from Output Pane
    Select Ethernet L2 layer in the top left Select Stack Layer list
    Paste the data copied in Step 5 into Ethernet L2 Data field, press Enter key

    Visit Wirefloss.com

  • #19408

    Hacktoolnosurvey
    Participant

    This really very helpful article for me and i just wanna Thank you for this

You must be logged in to reply to this topic.